ALL PRODUCTS

BONASIL A+ LIGHT
Read more

BONASIL A+ LIGHT

BONASIL A+ Light is low viscosity vinyl polysiloxane (VPS) correction impression material with optimized thixotropy to ensure easy handling. Its exceptional elastic recovery and dimensional change together with its extra hydrophilic properties are essential characteristics which provide high accuracy in impressions.

 

ISO 4823 / ADA No.19, Type 3 – light bodied consistency

 

Indications

 

Two step putty/wash technique
One step putty/wash technique
Crown/bridge work
Inlay and onlay impressions
Reline impressions

 

Characteristics – Advantages

 

  • Outstanding precision in detail reproduction
  • Ideal working/setting time ratio
  • Highly thixotropic
  • Ideal consistency
  • Exceptional dimensional stability
  • Excellent elastic properties
  • Very high tear strength
  • Extra hydrophilic
  • Void free
  • Non-sticky
PIT & FISSURE SEALANT
Read more

PIT & FISSURE SEALANT

PIT & FISSURE Sealant is a fluoride releasing light curing sealant for primary or permanent teeth. It is used in preventive dentistry where it has been clinically proven that sealants are effective in the prevention of caries. The fluoride that is released offers an additional protection against caries and its ideal viscosity allows it to penetrate into the deepest pits and fissures to ensure total sealing.

 

Indications
 Sealing of pits and fissures

 

Characteristics – Advantages
  • Very low viscosity for easy application and deep penetration
  • Fluoride releasing
  • Bubble free
  • Increased surface wear resistance due to inclusion of particles under 0.4 microns
  • Opaque colour to facilitate visibility
  • Radiopaque
BONASIL A+ LIGHT EXTRA
Read more

BONASIL A+ LIGHT EXTRA

BONASIL A+ Light Extra is a super low viscosity vinyl polysiloxane (VPS) correction impression material with optimized thixotropy to ensure easy handling. Its exceptional elastic recovery and dimensional change together with its extra hydrophilic properties are essential characteristics which provide high accuracy in impressions.

 

ISO 4823 / ADA No.19, Type 3 – light bodied consistency

 

Indications

Two step putty/wash technique

One step putty/wash technique

Crown/bridge work

Inlay and onlay impressions

Reline impressions

 

Characteristics-Advantages
  • Outstanding precision in detail reproduction
  • Ideal working/setting time ratio
  • Highly thixotropic
  • Ideal consistency
  • Exceptional dimensional stability
  • Excellent elastic properties
  • Very high tear strength
  • Extra hydrophilic
  • Void free
  • Non-sticky
BRIGHT TEMPORARY C&BBRIGHT TEMPORARY C&B
Read more

BRIGHT TEMPORARY C&B

BRIGHT TEMPORARY C&B is a self-curing, moldable composite designated for the construction of temporary crown and bridge restorations. It offers an excellent aesthetic result and in combination with its optimal mechanical properties is an ideal tool for fabricating provisional restorations. It produces low temperatures during intra-oral setting which protect against damage to the dental pulp.

 

Indications
Temporary crowns and bridges
Temporary inlays and onlays

 

Characteristics – Advantages

  • Superior aesthetics
  • Low temperature increase during polymerization
  • Precise and easy fit of the temporary crown/bridge due to low shrinkage
  • Optimum elastic phase
  • Long lasting and durable
  • Extremely high polishability
BONASIL A+ LIGHT HTS
Read more

BONASIL A+ LIGHT HTS

BONASIL A+ Light HTS is a low viscosity vinyl polysiloxane (VPS) impression material with exceptional characteristics. Its highly accurate impressions are a result of its superior wettability due to its extra hydrophilic properties. The extremely high tear strength values show resistance to tear guaranteeing superior impressions upon removal from the mouth.

 

ISO 4823 / ADA No.19, Type 3 – light bodied consistency

 

Indications

 

Two step putty/wash technique
One step putty/wash technique
Crown/bridge work
Inlay and onlay impressions
Reline impressions

 

Characteristics-Advantages

 

  • Exceptional tear strength
  • Extra hydrophilic
  • Outstanding precision in detail reproduction
  • Highly thixotropic
  • Ideal consistency
  • Exceptional dimensional stability
  • Excellent elastic properties
  • Void free
  • Non-sticky
ETCHING GEL
Read more

ETCHING GEL

ETCHING GEL is an acid etchant for enamel and dentin. Its phosphoric acid content is 37%. Etching gel increases the surface area of the tooth by making it rougher thus resulting in better adhesion for the bonding agent. For ease of dispensing the syringe tip is bendable so that any angle required can be obtained.

 

Characteristics – Advantages

 

  • Excellent surface retention
  • Easily rinsed
  • Clearly visible due to its colour
BONASIL A+ Alginate Free
Read more

BONASIL A+ Alginate Free

BONASIL A+ Alginate Free is a medium viscosity vinyl polysiloxane (VPS) impression material suitable for all alginate applications. The innovative A-Silicone Bonasil A+ Alginate Free combines the assets of VPS materials such as exceptional detail reproduction, elastic recovery, and dimensional stability with the properties of traditional alginates. It is also ideal for creating temporary crown and bridge impressions in preparation for the use of Bright Temporary C&B.

 

ISO 4823 / ADA No.19, Type 2 – medium bodied consistency

 

Indications

 

Preliminary impressions
Anatomic models
Fabricating temporary crowns and bridges
Opposing dentition
Fabricating simple removable prosthetic restorations
Orthodontic work
Case study models

 

Characteristics-Advantages

 

  • Outstanding dimensional stability
  • Exceptional elastic recovery
  • Highly thixotropic
  • Ideal consistency
  • Repourable
  • Long shelf life
  • Remarkable tear strength
  • Void free
  • Non-sticky
BONA-BITEBONA-BITE
Read more

BONA-BITE

BONA-BITE is a medium viscosity vinyl polysiloxane (VPS) material specifically for bite registrations with extremely high final Shore A hardness. Bona-Bite has a fast intraoral setting time and retains enough flexibility for easy trimming or cutting. The outstanding handling characteristics are essential for an accurate occlusal registration at the first attempt.

 

Indications

 

Making accurate occlusal registrations
Standard bite registrations in the end bite position
Key material for needle point registration
Production of small model segments

 

Characteristics-Advantages

 

  • Extremely high Shore A hardness
  • Highly thixotropic
  • Ideal consistency
  • Excellent dimensional stability
  • Remarkable tear strength
  • Outstanding resistance to elastic rebound
  • Void free
  • Non sticky
BONA-BITE AIR
Read more

BONA-BITE AIR

BONA-BITE Air is a medium viscosity vinyl polysiloxane (VPS) material for bite registrations which is characterized by its mousse-like consistency making it very light on extrusion. Due to its high thixotropy (non drip) it ensures accurate placement and enhanced patient comfort. It has a fast intraoral setting time and retains enough flexibility for easy trimming or cutting.

 

Indications

 

Making accurate occlusal registrations
Standard bite registrations in the end bite position
Key material for needle point registration
Production of small model segments

 

Characteristics-Advantages

 

  • Mousse-like consistency
  • Very high Shore A hardness
  • Highly thixotropic
  • Ideal consistency
  • Excellent dimensional stability
  • Remarkable tear strength
  • Outstanding resistance to elastic rebound
  • Void free
  • Non sticky
BONA-BITE CRYSTAL VISION
Read more

BONA-BITE CRYSTAL VISION

BONA-BITE Crystal Vision is a transparent vinyl polysiloxane (VPS) bite registration material with medium viscosity and is ideal for situations where a clear view of the area can optimize the accuracy of the impression. Its novel formulation produces highly transparent matrices through which the dentist can polymerize light-curing composites and, with this technique, greatly reduce the oxygen inhibition layer of the composite.

 

Indications

 

Making transparent occlusal registrations
Standard bite registrations in the end bite position
Key material for needle point registration
Production of small model segments
Silicone guide for composite restorations

 

Characteristics-Advantages

 

  • Outstanding transparency
  • Exceptional dimensional stability
  • High final hardness
  • Highly thixotropic
  • Ideal consistency
  • Very high tear strength
  • Void free
  • Non sticky

Showing 17–26 of 26 results

0